ISON IS-DG500 Series User Manual

38
<200-1468>
packet byte
3.8.7 sflow sampling-rate
Description
Specifies the statistical sampling rate. The sample rate is specified as N
to sample 1/Nth of the packets n the monitored flows. There are no
restrictions on the value, but the switch will adjust it to the closest
possible sampling rate.
Syntax
sflow sampling-rate [ sampler <range_list> ] [ <1-4294967295> ]
Parameter
Name
Description
< range_list >
Sampler instance
<1-4294967295>
Sampling rate
3.8.8 sflow timeout
Description
Receiver timeout measured in seconds. The switch decrements the
timeout once per second, and as long as it is non-zero, the receiver
receives samples. Once the timeout reaches 0, the receiver and all its
configuration is reset to defaults.
Syntax
sflow timeout [ receiver <range_list> ] <0-2147483647>
Parameter
Name
Description
< range_list >
Sampler instance
<0-2147483647>
Number of seconds.
3.9 SNMP Configure Command
3.9.1 snmp-server
Description
Enable SNMP server
Syntax
snmp-server
Parameter
Name
Description
3.9.2 snmp-server access
Description
snmp-server access configuration
Syntax
snmp-server access < group name > model { v1 | v2c | v3 | any } level
{ auth | noauth | priv } [ read <word255> ] [ write <word255> ]
Parameter
Name
Description
< group name >
32 words
< v1 | v2c | v3 | any >
V1~v3 security model
< level >
security level
{ auth | noauth | priv }
authNoPriv Security Level
noAuthNoPriv Security Level
authPriv Security Level
read
specify a read view for the group
<word255>
read view name
3.9.3 snmp-server community v2c
Description
Set the SNMP v2c community
Syntax
snmp-server community v2c <word127> [ ro | rw ]
Parameter

ISON IS-DG500 Series Specifications

General

Brand	ISON
Model	IS-DG500 Series
Category	Network Router
Language	English