Ispring RO500 - Product Features; Product Scope and Application; Water Treatment Process Flow; Filtration Performance Details

Product Features
1) Product Scope
A. For residential use ONLY.
B. Applicable water quality: municipal.
2) Water Treatment Process
Municipal tap water → composite filter → reverse osmosis filter → post-activated carbon
filter → purified water
3) Filtration Performance
Filter
Purpose
Composite filter
Removes unpleasant chlorine, taste, odors, cloudiness and
coloring.
Removes dirt, sand, silt, rust, and scale particles and absorbs
THMS and pesticides.
Reverse osmosis
membrane
Removes lead (removes up to 98% of lead), chlorine, fluoride,
arsenic, hormones, asbestos, calcium, sodium, and more
using a
0.0001 (one ten-thousandth) micron membrane.
Carbon block filter
Further enhances the sense and taste of the water.
4) Specifications
5) Filter Service Life Table:
Filter
Recommended replacement cycle
First stage composite filter
6 months
Second stage reverse osmosis membrane
24 months
Third stage carbon block filter
12 months
• This system works at maximum performance when connected to a municipal water supply with
an inlet pressure of 60 psi and a temperature of 75°F.
• The actual water flow rate will vary depending on several factors, such as water quality, high
TDS (500 ppm+), low temperatures (below 55°F), and low pressure (below 25 psi). These will
limit the performance of the system and reduce the filter’s life.
Model
Specification
Working Pressure
15 - 70 psi
Working Temperature
41–100°F
Flow Rate of Purified Water
Up to 0.4 gal/min.
Power Specifications
Input: 100-240V AC
Output: 24 DC
Page 5 www.123filter.com | (678) 261-7611 | support@123filter.com