What to do if the ballast alarms but the lamp doesn't light up on my Ispring Water Filtration System?
If the ballast is alarming but the lamp isn't lighting up in your Ispring Water Filtration System, first ensure the lamp tube is firmly connected. If it is, the lamp tube may be at the end of its life and needs replacing with a new UV lamp. If neither of these steps works, the ballast is likely damaged and should be replaced.
Why doesn't the ballast turn on automatically after turning on the water supply in my Ispring Water Filtration System?
If the ballast of your Ispring Water Filtration System does not turn on automatically after turning on the water supply, ensure the water flow switch is correctly connected and that the direction of the water flow on the switch is correct. Also, verify the unit is correctly connected to the power supply and that the power supply voltage is within the rated voltage range. Lastly, check that the water flow rate is at least 0.08 GPM.
Why is the ballast alarming, but the lamp lights up on my Ispring Water Filtration System?
If the ballast alarms and the lamp lights up on your Ispring Water Filtration System, the ballast alarm system is damaged. Replace the ballast.
Why are the indicator lights and alarm abnormal when the lamp is on in my Ispring Water Filtration System?
If the lamp turns on, but the indicator lights and alarm are abnormal on your Ispring Water Filtration System, the indicator lights are broken. Replace the ballast.
Why is the timer number not changing on my Ispring Water Filtration System?
If the timer number on your Ispring Water Filtration System does not change, reset the timing mode. If there is a decimal point behind the number, the timing is in minutes, and it will count one after one minute.
What to do if the Ispring Water Dispenser ballast alarm goes off and the lamp doesn't power on?
If the ballast alarm is activated, the green indicator light is off, and the lamp doesn't power on, it could be that the lamp has reached the end of its service life. In this case, you should replace the lamp.
What to do if Ispring Water Dispenser is leaking at the inlet/outlet?
If you notice a leak at the inlet or outlet of your Ispring Water Dispenser, wrap Teflon tape on the threads and reconnect the water pipe.
What to do if the Ispring Water Dispenser lamp turns on but indicator lights and alarm are abnormal?
If the Ispring Water Dispenser lamp turns on but the indicator lights and alarm are abnormal, the indicator lights may be broken. Replace the ballast.
How to fix a leak at the water inlet/outlet of the reactor chamber in my Ispring Water Filtration System?
General| Brand | Ispring |
|---|---|
| Model | UVF11A |
| Category | Water Dispenser |
| Language | English |
To Next Page
