Engine Identification
NOTE: In all communications with the distributor or HMI the engine number and
engine type must be quoted.
The engine serial number is stamped on the top of the water-cooled manifold,
on a designated number plate. On the Isuzu 70 this number plate is placed on
the side.
As part of your engine warranty please return your registration card, which is
supplied loose, as soon as possible.
Engine Information
Fill in your engine information below, so you have it to hand when contacting
your local dealer.
Engine Type
Engine Number
Gearbox Type
Gearbox Number
Date of Installation
Introduction
The ISUZU marine diesel engines are a product of Isuzu’s long years of experience
and advanced technology. Isuzu takes great pride in the superior durability and
operating economy of these engines.
To get the fullest use and benefit from your marine engine, it is important that
you install, operate and maintain it correctly. This manual, along with the engine
and gearbox operators’ handbook, is designed to help you do this.
Please read this supplementary manual carefully and follow its operating
maintenance recommendations, along with the installation guidelines. This will
ensure many years of trouble-free and economical engine operation. Sections in
this manual such as starting/stopping, wiring diagrams, etc override the sections
within the engine operators handbook.
Should you require further advice, technical assistance or an engine service,
please contact your nearest Isuzu marine engine outlet, a list of dealers are
enclosed. He knows your engine best and is ready to meet your requirements.
On completion of the warranty registration card, you will receive an engine spares
voucher, entitling you to your spares pack, please present this to your local Isuzu
Marine dealer.
All information, illustrations, and specifications contained in this Manual are
based on the latest product information available at the time of publication.
HMI are the UK and Eire distributor for Isuzu industrial and marine diesel engines,
producing the finished product in the UK. HMI produces this manual for use on
the Isuzu Marine engines that HMI manufactures.
HMI reserves the right to make changes in this manual at any time without prior
notice.
The information given is subject to the company’s current conditions of Tender
and Sale, is for the assistance of users, and is based upon results obtained from
tests carried out at the place of manufacture and in vessels used for development
purposes. We do not guarantee the same results will be obtained elsewhere
under different conditions.