6A – 56 ENGINE MECHANICAL
MINOR COMPONENTS
ROCKER ARM SHAFT AND ROCKER ARM
Disassembly Steps
1. Rocker arm shaft snap ring 5. Rocker arm shaft spring
2. Rocker arm 6. Rocker arm shaft snap ring
3. Rocker arm shaft bracket 7. Rocker arm shaft
4. Rocker arm
Disassembly
1. Rocker Arm Shaft Snap Ring
2. Rocker Arm
3. Rocker Arm Shaft Bracket
1. Use a pair of pliers to remove the snap rings.
2. Remove the rocker arms.
3. Remove the rocker arm shaft brackets.
If the rocker arms and rocker arm shaft brackets are to
be reinstalled, mark their installation positions by
tagging each rocker arm and rocker arm shaft bracket
with the cylinder number from which it was removed.
4. Rocker Arm
5. Rocker Arm Shaft Spring
6. Rocker Arm Shaft Snap Ring
7. Rocker Arm Shaft
011RY00009
011RY00010
To Next Page
Loading...
