ITech IT6300 Series

System Commands
Copyright© Itech Electronic Co., Ltd. 17
Unit
None
*RST
255.255.255.0
Example
SYST:COMM:LAN:CURR:SMAS "255.255.255.0"
Query syntax
SYSTem:COMMunicate:LAN:CURRent:SMASk?
Returns
<STR>
SYSTem:COMMunicate:LAN:DHCP[:STATe]
This command is used to set Dynamic IP address of power supply.
Command syntax
SYSTem:COMMunicate:LAN:DHCP[:STATe] <bool>
Arguments
0|1|OFF|ON
Reset Value
0
Example
SYST:COMM:LAN:DHCP 1
Query syntax
SYSTem:COMMunicate:LAN:DHCP[:STATe]?
Returns
0|1
SYSTem:COMMunicate:LAN:SOCKetport
This command is used to set socket port of communication.
Command syntax
SYSTem:COMMunicate:LAN:SOCKetport <NR1>
Arguments
<NR1>