ITech IT6300 Series

Apply Commands
Copyright© Itech Electronic Co., Ltd. 45
[SOURce:]APPly:CURRent[:LEVel][:IMMediate][:AMPLi
tude]
This command sets the output current of three channels at the same time
without switching channels.
Parameter 1
Current of channel 1
Optional Parameter 2
Current of channel 2
Optional Parameter 3
Current of channel 3
Unit
A
Example
APP:CURR 1,1,0.6
Query syntax
[SOURce:]APPly:CURRent[:LEVel][:IMMediate][:AMPLitude]?