ITech IT6512 User Manual

Inspection and Installation
Copyright ©ITECH Electronic Co., Ltd. 1
Chapter1 Inspection and Installation
1.1 Verifying the Shipment
Unpack the box and check the contents before operating the instrument. If wrong items
have been delivered, if items are missing, or if there is a defect with the appearance of the
items, contact the dealer from which you purchased the instrument immediately. The
package contents include:
Checklist of Package Contents
Item
Qty.
Model
Remarks
IT6500 power
supply
x1 IT6500 series
The IT6500 series include:
IT6512/IT6513/IT6512A/IT6513A/I
T6502D
Power cord
x1
IT-E171/IT-E172/
IT-E173/IT-E174
User may select an appropriate
power cord that matches the
specifications of power socket used
in the area. See the Section
Connecting the Power Cord for
details.
USB cable
x1
- -
CD x1 -
It contains IT6500 power supply
User’s Manual, Programming Guide
and other user documentations.
Ex-factory Test
Report
x1 -
It is the test report of the instrument
before delivery.
NOTE
Upon verification of the shipment, keep the package and relevant contents thereof in a safe place.
When returning the instrument for warranty service or repair, the specified packing requirements shall
be met. Refer to IT6500 User’s Manual for detailed requirements on returns.
1.2 Instrument Size Introduction
The instrument should be installed at well-ventilated and rational-sized space. Please
select appropriate space for installation based on the power supply size.
IT6500 series power supply different models are not the same size, the detail size of the
power supply are shown as below.

ITech IT6512 Specifications

General

Brand	ITech
Model	IT6512
Category	Power Supply
Language	English