ITech IT6800A Series - Chapter5 Output Commands; Output; Output:timer; Output:timer:data

Output Commands
Copyright © Itech Electronic Co., Ltd. 18
Chapter5 Output Commands
OUTPut
This order is used to open or close the output of power supply. When output is
off, the voltage and current of power supply is 0V/1mA.
Order syntax
OUTPut[:STATe] <bool>
Parameters
0|1|OFF|ON
Query syntax
OUTPut?
*RST value
0
OUTPut:TIMer
This order is used to set the state of output timer.
Order syntax
OUTPut:TIMer[:STATe] <bool>
Parameters
0|1|OFF|ON
Query syntax
OUTPut:TIMer?
OUTPut:TIMer:DATA
This order is used to set output timer’s time.
Order syntax
OUTPut:TIMer:DATA <NRf>
Parameters
0.1-99999.9
Unit
S
Query syntax
OUTPut:TIMer:DATA?