Quick Start 
  Copyright ©  Itech Electronic Co., Ltd.  6 
Chapter2 Quick Start 
This chapter introduces the front panel, the rear panel, key functions and VFD 
display function of the power supply, make sure that you can quickly know the 
appearance, instruction and the key function before you operate the load, Help 
you make better use of this series of power supply. 
2.1 Brief Introduction 
IT6800A/B  series  power  supply  is  single  output  DC  programmable  power 
supply,  which  support  panel  programming  and  offer  OCP  and  OVP. 
Furthermore, built-in RS232/USB communication interface is suitable for either 
bench  or  rack  mounted  operation,  which  can  provide  multiple  solutions 
according to the requirements of your design and test. IT6860A/B series and 
IT6870A/B series programming DC power supply offer the dual-range voltage 
switch for your choice, which can replace two ordinary ones.   
  High-visibility vacuum fluorescent display (VFD) 
  Digital keypad operation 
  High accuracy and high resolution 
  Low ripple and low noise 
  Intelligent fan control, energy conservation, noise reduction 
  Can be monitored by computer software 
  Output voltage and current values accordance with procedure 
  Can use the knob to adjust the voltage and current 
  Can adjust the numbers steps using the cursor 
  Can set the output timer(0.1~9999.9S) 
  Standard RS232/USB communication interface 
  Rich SCPI orders  and IT6820 compatible frame protocol to facilitate the 
formation of intelligent test platform