ITech IT6800A Series - DC Programmable Power Supply; Quality Certification and Assurance; Warranty; Instrument Size Introduction

Inspection and Installation
Copyright © Itech Electronic Co., Ltd. 1
Chapter1 Inspection and Installation
1.1 Verifying the Shipment
Unpack the box and check the contents before operating the instrument. If
wrong items have been delivered, if items are missing, or if there is a defect
with the appearance of the items, contact the dealer from which you purchased
the instrument immediately. The package contents include:
Checklist of Package Contents
Item
Qty.
Model
Remarks
Power Supply
x1
IT6800A/B
Series
The IT6800A/B series include:
IT6831A/IT6832A/IT6833A/IT683
5A/IT6861A/IT6862A/IT6863A/IT6
872A/IT6873A/IT6874A/IT6832B/I
T6833B/IT6835B/IT6861B/IT6862
B/IT6863B/IT6872B/IT6873B/IT68
74B
Power cord
x1
IT-E171/IT-E172
/IT-E173/IT-E17
4
User may select an appropriate
power cord that matches the
specifications of power socket
used in the area. See the
Section Connecting the Power
Cord for details.
CD
x1
-
It contains IT6800A/B power
supply User’s Manual,
Programming Guide and other
user documentations.
Ex-factory Test
Report
x1
-
It is the test report of the
instrument before delivery.
NOTE
Upon verification of the shipment, keep the package and relevant contents thereof in a
safe place. When returning the instrument for warranty service or repair, the specified
packing requirements shall be met.
1.2 Instrument Size Introduction
The instrument should be installed at well-ventilated and rational-sized space.
Please select appropriate space for installation based on the power supply size.
IT6800A/B series power supply different models are the same size, the detail size
of the power supply are shown as below. (Take the example of IT6862A)