ITech IT6832A - Page 25

Functions and Characteristics
Copyright © Itech Electronic Co., Ltd. 17
SET
parameters of power supply (voltage,
current settings...) before power was turned
off. The next time you power up the unit,
the parameters will be recalled
automatically.
P-OUT
(OFF)
OFF
Set the Power to OFF state after power up.
Keep
“Remembers” and restores the power
ON/OFF state of power supply before
power was turned off. The next time you
power up the unit, the on/off state will be
recalled automatically.
COMM
RS232
BAUD
Baudrate set
4800
9600
19200
38400
57600
115.2K
NONE
8BIT
NONE
8BIT
8BIT None parity
EVEN
8BIT
8BIT Even parity
ODD
8BIT
8BIT Odd parity
USB
CMD
SCPI
Set to SCPI protocol
SIG
Single unit to communicate with
PC
MUX
Multiple units to communicate
with PC
ADDR
Address range is
0-30
FRAME
Set to frame protocol
ADDR
Address range is 0-30
BEEP
(ON)
OFF
Disable key sound
ON
Enable key sound
KNOB
(ON)
LOCK
Lock the rotary knob
ON
Unlock the rotary knob
TRIG
(MANUAL)
MANU
Press (Shift)+ (Trigger) to
generate a trigger pulse.
BUS
Remote command trigger mode
MEM
(GROUP1)
GRP1-8
Group set, used with Save/Recall operation
TIMER
SET
OFF
Disable timer function
ON
Enable timer function(0.1-9999.9S)
RESET
NO
Remain unchanged of previous menu
setup
YES
Return to factory default setup
EXIT
Quit system menu
Enter