ITech IT8514B+ - [Source:]Dynamic:slew:fall <Nrf; [Source:]Dynamic:slew:fall

Input Settings
Copyright © ITECH Electronic Co., Ltd. 42
Parameters
None
Unit
A/uS
*RST Value
MAX
[SOURce:]DYNamic:SLEW:FALL <NRf+>
This command is used to set the current falling slope in dynamic mode.
Command Syntax
[SOURce:]DYNamic:SLEW:FALL <NRf+>
Parameters
MIN~MAX|MINimum|MAXimum
Unit
A/uS
*RST Value
MAX
Examples
DYN:SLEW:FALL 3
Query Syntax
[SOURce:]DYNamic:SLEW:FALL?
Returned Parameters
<NR2>
[SOURce:]DYNamic:SLEW:FALL?
This command is used to query the current falling slope in dynamic mode.
Command Syntax
[SOURce:]DYNamic:SLEW:FALL?
Parameters
None
Unit
A/uS