ITech IT8600 Series

Basic Operations
Copyright © ITECH Electronic Co., Ltd. 46
Description of parameter setting:
Parameter
Description
Balance
⚫ NO: Unbalance mode. You can set different values of
each phase.
⚫ YES: Balance mode. You can set value of each phase
consistently.
Set Sel
Select A/B/C/ABC phase. You can set ABC phase only in
balance mode.
View Sel
Select the phase A/B/C to display.
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com