ITech IT8600 Series

Technical Specifications
Copyright © ITECH Electronic Co., Ltd. 87
DC Section
Rating value
Input voltage
10-600V
Input current
0.4~80A
Input power
0-7.2kW
Operating
Mode
CC, CR, CP
Short Circuit
Simulation
The max. power point or max. current in CC mode
Meter
Current
Range
0-240A
Resolution
5mA
Accuracy
0.1%+0.2%FS+0.1%*CF^2*KHZ
Voltage
Range
0-600V
Resolution
10mV
Accuracy
0.1%+0.1%FS
Meter (continue)
Other
Parameters
S(VA),Q(VAR),P(W),Ip+,Ip-,Freq,THDv,CF,PF,R,FFT
Other
Voltage Monitor
±600v/±10V(Isolation)
Current Monitor
±240A/±10V(Isolation)
Protection
OCP:≈84Arms,OVP:≈430Vrms,OPP:≈7.5kW,OTP:85℃
Interface
GPIB, USB, LAN
Dimension
600.00mm(W) * 1475.01mm(H) *841.1mm(D)
Weight
145KG
AC Input
Voltage
100-240V AC
Frequency
47-63 Hz
Working
current
<7A(110V), <3.5A(220V)
*1, Typical parameter values in case of the 45-100HZ
*2, The scope of read-back resistance is( 1/(1/R+(1/R)*0.2%+0.01),1/(1/R-(1/R)*0.2%-0.01)
Test condition: The voltage/current input is no less than 10% FS.
Parameter
IT8625 V1.3
AC Section
ООО "Техэнком" Контрольно-измерительные приборы и оборудование www.tehencom.com