iTechworld AU4i - Battery and Fuel Level Checks; Check Battery Connection; Low Oil Operation Warning

To Next Page

To Previous Page

CHECK THE BATTERY CONNECTION

Battery access panel Battery connectors

1. Using the screwdriver provided loosen the screw and open the

battery access panel.

2. Locate and ensure the 2 white connectors inside the battery access

panel are connected firmly.

3. Refit the access panel, using the screwdriver provided tighten the

screw.

CAUTION!

Operating your iTechworld AU4i Inverter Generator with low oil may cause damage.

The oil alert system will shut down the iTechworld AU4i Inverter Generator

automatically before the oil levels fall under the safety line. Ensuring oil is full will

prevent unexpected stoppage.