iTechworld AU4i - Troubleshooting Common Issues; Troubleshooting: Device Not Starting; Troubleshooting: DC Socket Functionality

23
NO
NO
NO
NO
YES
YES
YES
NO
YES
3. Remove the spark plug, then pour a tablespoon of clean engine oil
into the cylinder.
4. Slowly pull the easy recoil pull start 5 times until you feel pressure
and then refit the spark plug. This will raise the pistons and help with
compression stroke and prevent the engine from rusting.
TROUBLESHOOTING
Engine doesn’t start
Is there petrol in the tank?
Add petrol
Are the battery terminals
connected?
Connect the battery
terminals
Is there sufficient oil?
Add recommended oil
Is the fuel tap in the ‘on’
position?
Turn the fuel tap to the
‘on’ position
Does a spark occur in the
park plug?
Replace the spark plug.
Still no spark?
Return the unit to dealer