iTechworld iTECHDCDC25 - Connecting Chargers

12
13
The Contol Hub is able to be recharged through various ports:
Connecting an AC charger to any of the in/out Anderson plugs.
Connecting a solar panel with a regulator to any of the in/out Anderson plugs.
Connecting alternator power to the DCDC charger alternator input Anderson
using our Plug & Play DCDC Wiring Kit*.
Connecting an unregulated solar panel to the DCDC charger solar input Anderson.
If you’re
using a model with an integrated DCDC charger, you can charge from a
vehicle alternator (wiring kit sold separately) or unregulated solar.
Note: Your solar panel open circuit voltage must not exceed 32V.
Do not connect an unregulated solar panel directly to the battery via any of the in/
connect it using any of the in/out Anderson plugs.
*Plug & Play DCDC wiring kit sold separately.
CONNECTING CHARGERS
•
•
•
•