5
INPUT POWER DIAL:
When the PS3600 PRO is connected to the AC mains for charging, the power
is automatically adjusted based on the actual input voltage. Turning the dial
clockwise increases the input power, while turning it anti-clockwise decreases the
input power. It’s important to note that charging this product at lower power levels
can be advantageous for extending battery life.
Recommended charge rate: 1600W
AIR INTAKE/OUTLET (BUILT-IN COOLING FAN):
The PS3600 PRO utilises an internal cooling fan to ensure it operates within the
appropriate temperature range. When the PS3600 PRO experiences a high output/
input load, it automatically turns on the fan. The fan may turn on intermittently to
keep the internal temperatures within the operating range. Please ensure you do
not block or cover the channel.
WARNING:
Maintain a space of 30cm away from the side suction and exhaust ports to
ensure proper heat dissipation.
AC 240V OUTPUT BUTTON:
To activate the AC output function, simply press the AC button. Keep in mind that
AC output frequency and voltage may vary depending on your location. If you need
to adjust these settings, follow these steps:
1. Press and hold the AC button for 3 seconds to enter the frequency switching
mode. You’ll notice that the 50Hz or 60Hz icon will start ashing on the display.
2. Give the AC button a short press again to select between 50Hz or 60Hz. Wait
until the ashing icon stops and displays your chosen frequency (either 50Hz
or 60Hz), which indicates a successful switch.
3. To adjust the voltage, quickly press the AC button 10 times. This will allow you
to cycle through available voltage options.
By following these steps, you can easily customise the AC output frequency and
voltage to suit your specic needs.
To Next Page
Loading...
