6
XT90 PORT (SOLAR/CAR INPUT):
Use the included XT90 to 50A Anderson adapter to connect your solar panel.
The maximum input of the solar panel is 2000W and the maximum voltage is
160V (do not exceed 160V).
The cable we've supplied has a maximum rating of 50 amps, be sure to not to
exceed this limit unless you've upgraded the cable.
AC INPUT:
Use the included wall socket to get 2200W fast charging, which can fully
charge the PS3600 PRO from 0 to 100% in 2 hours.
1. The PS3600 PRO should be charged directly by the wall socket, please do
not use extension cords.
2. Do not use the same socket to connect other devices to when charging
the PS3600 PRO. When a socket in a general household exceeds a certain
wattage, the safety circuit breaker will activate.
3. Recommended charge rate: 1600W.
OVERLOAD PROTECTION:
To safeguard the power station from potential damage resulting from excessive
AC input current due to lightning or grid uctuations, the overload protector is
designed to activate and disconnect the AC input in such situations.
If the overload protector has been triggered, and you need to restore the AC
input, please follow these instructions:
1. First, ensure that the PS3600 PRO is turned off, and unplug all connected
devices and ports from it.
2. Conrm that all connected ports are in their standard, normal state.
3. Now, you can turn on the PS3600 PRO.
4. Locate and press the overload protection button. This action will
re-engage the AC line and restore the AC input.
To Next Page
Loading...
