iTero Element 5D - Chapter 4: Operating Instructions; End-of-Day System Shutdown; Relocating the System

iTero Element 5D operation manual English
13
Chapter 4:
Operating instructions
It is recommended to keep the system in operation during oce
hours to allow background file transfers between the doctor’s oce,
the doctor’s partnered labs, and the Align Technology Center. It is
recommended to shut down the system at the end of the day, and to
reboot in the morning.
End-of-day shut down
1. Close all files and applications.
2. Press and release the Power Switch on the bottom of the
screen to shut down the system.
Moving system within the office
To ensure maximum system protection, it is recommended to have
two people move the system. Follow these instructions for
relocating the system:
1. Verify the scanning unit (wand) sits well inside the scanning
unit cradle (holder).
2. Unplug system from the wall outlet.
3. Move the system carefully using two people.
4. Place the system at its new location and it plug into a
wall outlet.