Ithaca 150 - General Description; Series 150 Models; Standard Features

Programmer's Guide PcOS Series 150 General Description
12/14/99 Rev G Page 3
Chapter 2:
General Description
Series 150 Models
There are four basic models of the Series 150 Printer. They are:
Model 151 Receipt Printer;
Model 152 Receipt/Journal Printer;
Model 153 Receipt/Journal/Validation Printer; and
Model 154 Receipt/Validation Printer.
Standard Features
The following features are common to the entire family of printers:
• 340 cps logic-seeking print speed;
• 4.0 inches per second paper feed speed;
• 2.40-inch (normal) or 2.83-inch (wide) print zone;
• Snap on ribbon cassette;
• Dual cash drawer drivers with status;
• Centronics parallel, IEEE 1284, serial RS-232C, or USB interfaces;
• Configurable receive buffer;
• Standard, Epson, Microline, Star, NCR2567, and Telpar emulations;
1
• Standard all-points-addressable (APA) or EPOS bit-image graphics;
• Standard and EPOS International Character Sets;
• 8, 10, 12, 15, 17.1, 20, and 24 characters per inch selections;
• Emphasized, enhanced, double-wide, double-high, double-wide double-high, half-high,
underline, subscript, superscript, and rotated print;
• Operator-visible print zone;
• Self-diagnostics; and
• Setup and configuration utility program.
1
Other emulation’s can be made available. Contact Ithaca Peripherals’ Sales Department for more
information. See “Contacting Ithaca Peripherals” on page 2.