Programmer's Guide PcOS Series 150 Operator Panel Controls
12/14/99 Rev G Page 89
Chapter 6:
Operator Panel Controls
Push Buttons - Momentary Switches
The FEED key advances the receipt and journal paper.
The RELEASE key opens and closes the validation clamp. It cycles through open and close mode.
The RESUME key restarts the printer after a failure has been cleared.
Indicators
There are three indicators. They are READY, ALARM, and POWER. The printer can be in any of
the following states.
STATE READY ALARM POWER
(Green (Red (Green
Indicator) Indicator) Indicator)
Ready (The printer is ready to receive data and print.) On Off On
Not ready Off Off On
Off-line
Ready but waiting for a form Flash Off On
Out of paper Off On On
Menu mode Flash Off Flash
Test mode Flash Off On
Printer fault Off Flash On
Printer failure Off Off Off
Watchdog fault (The printer resets.)
To Next Page
Loading...
