HMPRO35 OPERATOR’S MANUAL
24 www.itmtools.com.au
TRADEMASTER
Magnetic Base Drilling Machines
Tools and Machinery
AIR
Cutter Type Features Diameter Available Cut Depth Available Applications
Silver Series Metric
• M2AL High Speed Steel
• Universal Shank
• Multi-Cut Geometry
• Step Hardened
• 12 to 60mm Metric • 25mm & 50mm • General Purpose
Silver Series Imperial
• M2AL High Speed Steel
• Multi-Cut Geometry
• Step Hardened
• 7/16" to 2-1/4" Imperial • 1", 2" & 3" • General Purpose
Gold Series Metric
• M2AL High Speed Steel
• Titanium Nitride Coated
• Universal Shank
• Multi-Cut Geometry
• Step Hardened
• 12 to 60mm Metric • 25mm, 50mm & 75mm • General Purpose
Super-Cut
• Made In U.S.A
• Highest Quality
• M2 High Speed Steel
• Multi-Cut Geometry
• 12 to 60mm Metric
• 7/16" to 2-1/2" Imperial
• 25mm, 50mm & 75mm
• 1", 2" & 3"
• General Purpose
Super-Cut TICN
• Titanium Carbon
Nitride Coated
• Made In U.S.A
• M2 High Speed Steel
• Multi-Cut Geometry
• 12 to 32mm Metric • 25mm & 50mm
• Stainless Steel
• Cast Iron
Super-Cut M42 Cobalt
• M42 High Speed Steel
• 8% Cobalt
• Titanium Nitride Coated
• Made In U.S.A
• Multi-Cut Geometry
• 1/2" to 1" Imperial • 1"
• Truck Chassis
• Hardened Steels
Super-Cut M42 Chassis
• Stack Ground Geometry
• M42 High Speed Steel
• 8% Cobalt
• Titanium Nitride Coated
• Made In U.S.A
• 1/2" to 1" Imperial • 1"
• Truck Chassis
• Multi-Layered Steel
Pro-Cut
• ASP Powder Steel
• Multi-Cut Geometry
• Incredible Performance
• 12 to 22mm Metric • 25mm & 50mm
• Rail Line
• Hard Materials
• Stainless Steel
• Wear Plate
Maxi-Cut
• Tungsten Carbide Tipped
• Increased Resistance
to Breakage
• Multi-Cut Geometry
• 14 to 150mm Metric
• 5/8" to 2-3/8" Imperial
• 50mm, 75mm
& 100mm
• Large Diameters
• Stainless Steel
• Hard Materials
• Wear Plate
Maxi-Rail
• Tungsten Carbide Tipped
• Increased Resistance
To Breakage
• Multi-Cut Geometry
• 18 to 35mm Metric • 25mm
• Rail Line
• Hard Materials
• Wear Plate
To Next Page
