HMPRO35 OPERATOR’S MANUAL
25 www.itmtools.com.au
TRADEMASTER
Magnetic Base Drilling Machines
Tools and Machinery
AIR
Accessory Type Features
Industrial Arbors
• #2 to #5 Morse taper
• 50mm to 110mm maximum depth of cut
Drill Chucks & Adaptors
• #2 to #4 Morse taper
• 13mm to 19mm capacity
Pipe Attachment
• Can be used on any ferrous and non-ferrous pipes
• Suit pipe diameter from 80mm to 500mm
Vacuum Pad
• Adapt your Holemaker machine for use on non-ferrous materials
Pilot Pins
• 4.7mm to 8mm diameter
• 25mm to 200mm depth of cut
2 Piece Pilot Pins
• 8mm diameter
• 75mm, 100mm & 125mm depth of cut
Tapping Head
• 3 to 12mm tapping head with #2 Morse taper
• 8 to 20mm tapping head with #3 Morse taper
Holemaker
Cutting Fluid
• Heavy duty water solubale for use with Holemaker annular cutters and other arduous
machining applications
• For use with ferrous and non-ferrous metals
Countersinks
• 30mm to 55mm maximum size
• 3 flute high speed steel
Twist Drills & Adaptors
• 6mm to 12mm metric drill diameters
• 1/4" to 1/2" imperial drill diameters
Twist Drills - Weldon Shank
• 6mm to 18mm metric drill diameters
• 1/4” to 1/2” imperial drill diameters
• 30mm depth of cut
Centurail Indexible
Insert Drills
• 18mm to 36mm diameters
• 6mm to 11.5mm insert size
• 30mm depth of cut
Combination Drill Tap
• M6 x 1.0mm to M30 x 3.5mm diameters
• 5mm to 26.5mm drill diameters
To Next Page
Loading...