REFRIGERANT DRYERS OPERATOR’S MANUAL TM357-035 & TM357-074
5.3 INSTALLATION
Ensure that there is sufficient space around the machine to allow maintenance
Electrical Connection
Check that the supply voltage is the same as the value indicated on the machine data
plate. Check the condition of the line leads and ensure that there is an efficient earth
lead.
Connection to the compressed air network
Fit a manual interception valve between the machine and the compressed air network so
that the dryer may be isolated during maintenance operations.
Drainage must comply with the local regulations in force.
10
www.itmtools.com.au
To Next Page
Loading...