What to do if my ITRON Radio will not turn on or off?
To resolve the issue of the ITRON Radio not turning on or off, disconnect it from external power and firmly press the power button for six seconds. This action will force the radio to reset.
How to fix USB connection problems with ITRON Radio?
To troubleshoot USB connection problems with your ITRON Radio: * If you are using Windows 7 or 8, install the Itron Mobile Radio USB drivers for Windows 7 & 8 available for download from https://access.itron.com. * Inspect the radio and PC USB ports, as well as the USB cable and connectors, for any damage, dirt, or contaminants. * Ensure the USB cable is USB 2.0 compliant. Itron recommends using only the supplied cables.
Why does the battery power drain quickly on my ITRON IMR?
If the battery of your portable ITRON IMR Radio drains quickly, ensure it indicates a full charge after an overnight charge. If the IMR has been in a hot vehicle or in direct sunlight, move it to a cooler location. If these steps don't resolve the issue, consider replacing the battery.
What to do if ITRON Radio does not remain on or battery does not charge (IMR-FT)?
If your ITRON Radio (IMR-FT) does not remain on or the battery isn't charging, ensure the DC power connector is securely seated in the IMR-FT charge base. Also, verify that +12V DC power is being supplied to the vehicle accessory adapter or fuse block, and check the five amp fuse. If using a vehicle accessory adapter, make sure it stays seated in the 12V DC jack. If problems persist, consider replacing the battery.
How to solve Bluetooth connection problems with ITRON IMR?
To troubleshoot Bluetooth connection problems with your ITRON Radio, consult your application’s user guide for setup information. Also, ensure that the portable IMR and PC are near each other and that the signal path is not blocked.
How to fix ITRON Radio battery that does not charge (portable IMR)?
If the battery of your portable ITRON IMR Radio is not charging, ensure the USB charger adapter is USB 2.0 compliant and that the USB ports on both the IMR and adapter are clean. If charging from a PC, try a different USB port. Also, try a different AC outlet. If the issue persists, replace the battery.
What to do if ITRON IMR will not turn on?
To resolve the issue of the ITRON Radio not turning on or off, disconnect it from any external power sources. Then, firmly press the power button for six seconds. This action will force the radio to reset.
How to troubleshoot ITRON Radio battery that does not charge?
To ensure your portable IMR ITRON Radio battery charges properly, use a USB 2.0 compliant charger adapter; Itron recommends using only the supplied adapter. Ensure the USB port is clean. If charging from a PC, try a different USB port. If the problem persists, try a different AC outlet. If none of these steps work, consider replacing the battery.
What to do if ITRON Radio battery (IMR-XA, IMR-FT) does not charge?
If your IMR-XA or IMR-FT ITRON Radio battery isn't charging, ensure the DC power connector is securely seated in the IMR-XA charge base. Verify that +12V DC power is being supplied to the vehicle accessory adapter or fuse block. Check the five amp fuse. If using a vehicle accessory adapter, ensure it stays seated in the 12V DC vehicle accessory jack; if not, try a different jack or a hard-wired cable installation. If problems persist, replace the battery.
How to fix USB connection problems with my ITRON IMR Radio?
To resolve USB connection issues with your ITRON Radio, start by installing the Texas Instruments drivers. Also, carefully inspect the USB port for any signs of damage, dirt, or other contaminants that might be affecting the connection.
Discusses precautions for using the equipment and potential voiding of authorization.
Prohibits operating transmitters on commercial aircraft; battery must be removed for air shipment.
Details compliance with FCC RF energy exposure limits, including SAR limits and testing.
Details the features common to all Itron Mobile Radio models.
Lists other relevant documents for the Itron Mobile Radio and FCS app.
Lists components included with both portable IMR and mobile IMR-FT models.
Instructions for plugging in the micro-USB cable and charging the battery.
Steps for connecting the DC power cable to the charge base and vehicle power.
Explains how to power the radio on and off using battery or external power.
Describes the LED colors and patterns for common power conditions.
Describes LED colors and patterns for common communication conditions.
Provides specifications for the external vehicle antenna, including part number and frequency.
Outlines tasks for installing the antenna, including location selection and mount types.
Details routing and installation of DC power cables, including removable and permanent methods.
Explains installing the mounting jacket and plate, including seat belt, partition, and pedestal options.
Procedure for disconnecting cables and releasing the IMR-FT from the mounting jacket.
Instructions for cleaning the radio's casing and protecting the USB port.
Step-by-step guide for replacing the battery, ensuring water tightness.
Recommends replacing antenna cable connections and notes indoor servicing.
Covers inspecting, cleaning, and replacing parts of the external antenna system.
Practices to ensure long battery life, including charging and temperature guidelines.
Instructions for safe use and care of the AC power adapter.
Provides common issues and their corresponding solutions for the radio.
Tips for maximizing radio performance and data collection factors like absorption and shielding.
Guidance on pairing the radio with Windows devices, recommending the Itron Pairing Tool.
Step-by-step instructions for pairing the radio with a Windows device using the Pairing Tool.
To Next Page
General