ITW Dynatec DYNAMINI - Page 75

c. 2004
DYNAMINI ASU Manual #20-25
Page 10-10 Component Illustrations & BOM’s
Revised 1/05
102591 Hopper (Model 05, 5 Kg / 11 lb) 1
103241 Hopper (Model 10, (10 Kg / 20 lb) 1
104166 Mechanical Overtemp Thermostat Assembly 1
105279 Temperature Sensor, RTD, PT 100 1
not replaceable Cast-In Heater 4
103041 Hopper Filter 1
No Part Number Nut, M4 8
No Part Number Washer, M4 8
No Part Number Porcelain Spacer 4
102411 Cap,HIi Temp, .60 ID x 1.5L 2
111670 Filter Manifold Assembly 1
104852 Drain Plug 1
101833 10-32 x 1/2 Tamper Proof Retaining Screw 1
101840 Pressure Relief Valve 1
105110 M8 x 55 SHC Screw 2
N00181 O-ring, -014 3
101624 BSP Hose Fittingx#6JIC 2
102236 Manifold Output Filter 1
101625 1/4-18 BSP Plug 1
101247 Filter Basket, 100 mesh/ 149 micron 1
101246 Filter Basket, 40 mesh/ 420 micron (option) 1
069X058 O-ring, -028 1
006C024 Filter Nut 1
N00754 Flush Plug 3
101175 Pressure Gauge Assembly (Option) 1
101174 Pressure Gauge (option) 1
N00104 Fitting Hex Nipple (option) 1
N00196 O-ring, #-111 1
103330 Fitting, Adapter, 9/16 Straight x 1/4 NPT (option) 1
N04531 Fitting, Street Tee, Brass, 1/4 NPT (option) 1
101172 Fitting Adapter, 1/4 MPT x 1/4 FPT 1
Bill of Materials for DYNAMINI Filter And Melt Section
Item No.
Part Number
Description
Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27