ITW Dynatec DYNAMINI - Chapter 2 Specifications and Dimensions; Model Designation Matrix

ITW Dynatec c. 2004
DYNAMINI ASU Manual #20-25
Page 2-1
Revised 1/05
Chapter 2
SPECIFICATIONS AND DIMENSIONS
N X 2 X X X X - X X X X
DYNAMINI
5 = 5 kg/ 10 lb.
1 = 10 kg/ 20 lb.
HOSE: 2-hose capable
PUMP TYPE:
P12 = Piston Pump 12:1
GAS = Gear Pump 1.5cc
GBS = Gear Pump 3.2cc
GCS = Gear Pump 4.5cc
GDS = Gear Pump 0.55cc
GES = Gear Pump 10cc
VOLTAGE:
1 = 100 - 120VAC, 1 phase
2 = 200 - 240VAC, 1 phase
OPTIONS:
ACCESSORIES:
F = 100 mesh/ 149 micron outlet filter (40 mesh/ 420 micron is standard)
G = Analog pressure gauge
V = Swirl kit, 1 hose
W = Swirl kit, 2 hose
CONFIGURED SYSTEM OPTIONS:
C24 = 2.4m/ 8 ft. Abrasion resistant hose
C36 = 3.6m/ 12 ft. Abrasion resistant hose
CHB = Hand Bead Applicator
CHS = Hand Swirl Applicator
STACKTITE SYSTEM OPTIONS:
SB = Bead applicator
SS = Swirl applicator
EXAMPLE:
N52GAS2-F = Dynamini 10 lb. hopper w/ 1.5cc gear pump, 240 VAC/ 1 phase and 100 mesh outlet
filter.
DYNAMINI Model Designation Matrix