5.2 Battery charging
EA-5J has an internal battery. It can be charged by the USB terminal on the right side.
Even charging the measurement can be done. When the POWER button blue is()
pressed, the battery condition is displayed on the left side of LCD as shown in the
figure below. Charge the battery when display shows the battery to be empty.The
charging should be done by using a USB cable to connect to an AC/DC adaptor with
USB terminal or a personal computer. A CHARGE LED lights up in red when charging.
It lights up in green when charging is complete.
Battery condition display
CAUTION
The battery condition display indicator on the display is not proportionaltothe
remaining energy. The battery might rapidly decrease by the battery conditions.
Charge with battery
-page13-
To Next Page
Loading...