5101015-01 Rev 2 15
3.3 Using the Sidekick Footswitch
If you have ordered Top Gun with Sidekick, then you have also
received the footswitch. The switch connects to the power supply
and when depressed, activates both airflow and power to the ion
emitter assembly. A red LED on the nozzle indicates power.
3.4 Using the Optional Optical Sensor
For automated assembly operation, Top Gun may be ordered with
an infrared Optical Sensor. The Optical Sensor automatically
activates Top Gun when an object is in range. The Optical Sensor
has an "adjustable range" from 1-30 inches.
Plug the sensor cable into the power unit (if not already done so out
of the shipping carton). To use the Optical Sensor, simply pass or
hold an object to be ionized in front of Top Gun. Top Gun (orange
LED is lit) will trigger and stay on until the object is removed from in
front of the sensor. The green LED is lit when the optical sensor is
on. The lower dial should be set to the "L" position (on the Light
reflection). This triggers Top Gun when an object passes in front of
the sensor. If the lower dial is set to the "D" position (for Dark), then
the sensor will trigger Top Gun (orange LED is lit) if the object is
removed in front of the nozzle. If desired, the top dial may be
adjusted to change the sensitivity of the sensor (min to max).
Figure 6. Top Gun with Optical Sensor
To Next Page
Loading...