5101015-01 Rev 2 22
4.5 Replacing the Electrical Safety Fuse
Top Gun is provided with a 250V, Time-lag, 5 x 20 mm fuse located
in a fuse drawer on the power inlet module.
Replace the 400 mA SLO fuse only with an identically rated part. If
replacing the fuse does not restore the unit to operation, leave the
unit turned OFF and disconnected from power. Contact Simco-Ion
technical support for additional information.
CAUTION! Turn OFF Top Gun and disconnect it from power
before attempting to access the fuse drawer.
ATTENTION: Désactiver le modèle Top Gun et débranchez-le
de la source d'alimentation avant de tenter d'accéder à le tiroir
à fusibles.
To Next Page
Loading...