5101015-01 Rev 2 24
5.1 Specifications
1. Tested in accordance with ANSI/ESD STM3.1-2015.
Input Voltage 120 VAC, 60 Hz, 0.2A; 230 VAC, 50/60 Hz, 0.1A
Discharge
1.3 sec @ 6” (15.2 cm), 30 psi (±1000-100V); 0.5 sec @ 2” (5 cm), 60 psi
(±1000-100V)
1
Balance 0 ±15V
Power Inlet IEC320 with 400 mA SLO fuse
Air Inlet 1/4” NPT (female)
Gas Input 100 psi (7 bars) max, Clean dry air, nitrogen or carbon dioxide
Air Consumption
2.4 scfm @ 30 psi (68 l/min, 2 bars); 4.6 scfm @ 60 psi (130 l/min, 4 bars);
7.4 scfm @ 100 psi (210 l/min, 7 bars)
Output Pressure Pressure relief in nozzle, complies with OSHA requirements
Audible Noise
76 dB @ 30 psi (2 bars), 89 dB @ 60 psi (4 bars), 97 dB @ 100 psi (7 bars)
measured 24" (600 mm) from nozzle
Operating Env. Temperature 50-95°F (10-35°C); humidity 30-60% RH, non-condensing
Ozone
0.001 ppm measured 18" (450 mm) from gun operating @ 15 psi (1 bar); test
conducted in accordance with EPA EQOA-0577-019 using Dasibi Ozone
Monitor model 1003AH
Cable 7' (2.13 m) and 14' (4.26 m)
Filter
99.9% efficient, 0.3 micron or larger air particles; 99.9% coalescing
efficiency
Enclosure
Gun: static dissipative polycarbonate/ABS alloy; cable: static dissipative
polyurethane; power unit: powder-coated steel
Dimensions 6.45H x 5.20W x 3.35D in. (does not incl. flanges) (164H x 132W x 85D mm)
Weight Gun: 6.5 oz (185g); cable: 1.25 oz/ft (115 g/m); power unit: 6.5 lb (2.7 kg)
To Next Page
Loading...