EasyManua.ls Logo

Ivation IVAPAC14BTU - Control Panel and Security Bracket; Control Panel Overview; Optional Security Bracket Installation

Ivation IVAPAC14BTU
14 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
OPTIONAL SECURITY BRACKET INSTALLATION
CONTROL PANEL OVERVIEW
Your window kit also includes an optional security bracket that can be installed to prevent the window from being
opened from the outside while the window kit is in place.
To install the security bracket, fasten it to the window with a type B screw as shown, depending on the type of window.
1. POWER: Press the POWER button once to manually turn the portable air conditioner on. Press it again to turn
the unit o.
2. MODE: Press the MODE button to cycle through the dierent mode options. The corresponding indicator LEDs
will then light up on the control panel. The available modes are as follows: Air Conditioning mode (COOL), Fan
Only mode (FAN), Dehumidifier mode (DRY), Sleep mode (SLEEP), and Auto mode (AUTO).
NOTE: The exhaust hose and window kit must be installed in order to use the unit in air conditioner, dehumidifier,
auto, and sleep modes. When using this device in fan-only mode, however, the window kit is not required.
3. TEMP: Set your desired temperature by pressing the + or buttons while the unit is in air conditioning mode.
The temperature indicator LED will flash the temperature while it is being adjusted, and then steadily display the
temperature at which it is set until you change it.
NOTE: The temperature will be displayed in degrees Fahrenheit. To switch between Fahrenheit and Celsius, press
and hold the + and buttons for three (3) seconds while the unit is plugged in but not powered on.
4. FAN SPEED: Press the FAN SPEED button to cycle between the three fan speeds: high, medium, or low. The
corresponding indicator LEDs will light up.
NOTE: When the unit is in dehumidifier mode, the fan speed cannot be changed; when Turbo Cool mode is activated,
the fan speed will automatically be set on high and cannot be changed during that time.
Single/Double Hung Windows Sliding Windows
Security bracket
Type B
screw
Security
bracket
Type B screw
Sleep Mode
Indicator
Fan Speed
Indicators
Auto Mode
Indicator
Air Conditioner
Mode Indicator
Fan Mode
Indicator
Power
Indicator
Bucket Full
Indicator
Turbo Cool
Indicator
Timer
Indicator
Dehumidifier
Mode Indicator
5 2 3 4 6 1

Related product manuals