8
5. TIMER: Press the TIMER button while the unit is powered on to set a time until it automatically turns o. Pressing
it while the unit is plugged in but powered o will set a time until it automatically turns on. Use the + and – buttons
to set the duration of the timer in hours (from 1-24).
6. TURBO COOL: Press the TURBO COOL button to set the air conditioner to cool at a temperature setting of
61°F (16.1°C) with the fan on high for ten (10) minutes and then return to the original settings. Fan speed is not
adjustable in this mode.
7. BUCKET FULL: When this air conditioner cannot evaporate the collected moisture fast enough, the excess
water collects in a backup water tank located inside the unit. This water tank will need to be manually emptied
periodically. When the water tank is full and needs to be emptied, the BUCKET FULL indicator will light up.
8. LOUVER GUIDES: (On top of the unit by the control panel.) This unit has 2-way directional louvers. Use these
guides manually to direct air up or down.
REMOTE CONTROL OVERVIEW
LCD DISPLAY
POWER BUTTON
TIMER/TEMP DECREASE
TIMER/TEMP INCREASE
REMOTE LOCK BUTTON
SLEEP BUTTON
TIMER BUTTON
TURBO COOL
BUTTON
°C/°F SWITCH BUTTON
MODE BUTTON
FAN SPEED
MY TEMP BUTTON
To Next Page
Loading...
