10
USAGE
USAGE
Add Device (EZ Mode)
• Plug the unit into an outlet, but do not power on the
unit. Hold the Fan button for three (3) seconds until
the unit beeps and the indicator light blinks rapidly.
• From the Home Page, press “Add Device” or press +
in the top right corner of the screen. (If you already
have a device added to your account, the “Add
Device” button will not appear.)
• In the app, select your air conditioner model from
the device menu. When the indicator light on the unit
blinks rapidly:
- Press “Confirm”.
- Select your Wi-Fi® network.
- Enter your router password.
NOTE: Connection may take up to 60 seconds.
• Once complete, the indicator light will stop blinking
and remain lit.
• Once the device is added, you can use the menu
of the app to change the name and location of the
device.
• When you are finished, press “Done”.
Add Device (AP Mode)
If you are having trouble connecting to your device
using EZ mode, you may connect to it using AP mode by following the
instructions below.
• Plug the unit into an outlet, but do not power on the unit. Hold the Fan
button for three (3) seconds until the unit beeps and the indicator light
blinks rapidly. Hold the Fan button a second time for three (3) seconds
until the indicator light blinks slowly.
To Next Page
Loading...
Need help?
General
