3. Product Functions
3.1 Remote Control Functions
Basic remote functions for your SmartVac. For
additional information on your SmartVac’s
functions, see Section 3.2.
1 Power
Press once to put the robot into Sleep Mode.
Press again to awaken robot from Sleep Mode.
2 Auto button
Robot will enter Auto-Clean mode.
3 OK button
When setting the time or a schedule, press to
confirm changes.
4 Edge Cleaning
Robot will enter Edge Cleaning mode.
5 Clock button
Manually set the device clock.
6 Turbo Mode
While robot is cleaning, press to activate Turbo
Mode. Robot will increase its movement speed.
Press again to disable Turbo Mode.
7 Plan button
Press to schedule a time to clean. Robot will
clean daily during the scheduled time.
8 Spot Cleaning
Robot will enter Spot Cleaning mode.
9 D mode button
Enables and disables Full-Go Mode. During
Full-Go mode, robot will increase cleaning
efficiency.
10 Direction button
1 Forward
Moves the robot forward. Increases the hour
and minute values when setting the time or
cleaning schedule.
2 Backward
Moves the robot backwards. Decreases the
hour and minute values when setting the time
or cleaning schedule.
3 Left Arrow
Rotates the robot counter-clockwise. Will also
skip between hour and minutes when setting
the time or schedule.
4 Right Arrow
Rotates the robot clockwise. Will also skip
between hour and minutes when setting the
time or schedule.
11 HOME Button
Manually tells the robot to charge. Robot will
automatically locate the nearest charging
station.
To Next Page
Loading...
Need help?
General