Quick Start Guide
***Important*** Before connecting your vacuum, make sure it is powered on. Press and hold
AUTO button on the robot for at least 3 seconds until it beeps. If the LED panel displays
, your robot ready to be connected..
1. IView iHome App
Download and install the iView iHome APP from the Apple or Google Play store.
Register an account using either your email or your cell phone number [Fig 1].
Enter a password and select “Confirm” [Fig 2]
Tap + on the top-right corner to add a new device [Fig 4]. Scroll down and select Robot Vacuum [Fig 5];
Make sure the Wi-Fi icon on your vacuum is blinking rapidly and select Confirm [Fig 6]; Enter your Wi-fi
password and select Confirm [Fig 7]. Vacuum will begin connecting to your network [Fig 8]; Connection
will reach 100% when finished.[Fig 9];
To Next Page
Loading...
Need help?
General