Safety
8
2Safety
These Operating Instructions only apply together with the Operating Instructions from the
milling systems PrograMill PM3, PM5 and PM7 (“Supporting documents”, page 7). Read the
instructions carefully before using PrograMill Base, in particular the chapter regarding safety
instructions and warnings.
WARNING! Improper use of the product.
Danger to the user.
The safety chapter contains important information on the safety of the product: Please
read thoroughly prior to use.
The product is built according to state-of-the-art technology and recognized safety
regulations. Nevertheless, its use could constitute a risk of injury of the user or third party or
possibly cause impairment to the product and other property.
2.1 Intended use
PrograMill Base is designed for use in the dental technical field as a place to stand the
PrograMill PM3, PM5 or PM7 milling systems and store accessories, cleaning materials, tools
and discs / blocks. Use the PrograMill Base exclusively for this purpose.
In the case of damage caused by improper use or failure to observe the Operating Instructions,
all liability and warranty claims are void.
2.1.1 Potential improper use
Equipment, accessories and components whose weight exceeds the load-bearing capacity of
PrograMill Base and built-in pull-out shelf must not be placed on or in PrograMill Base.
The following is considered as misuse of the system:
• Non-compliance with the intended use, intended operator specifications or intended
environment
• Modifications, maintenance and repairs without the permission of Ivoclar Vivadent
• Operation with unsuitable parameters
Improper use of the PrograMill Base can lead to the following:
• Danger for operating personnel
• Impairment of the operability of the PrograMill Base
Ivoclar Vivadent assumes no liability for damage resulting from improper use.
To Next Page
Loading...
