IVT 12PHR-N - Page 62

6-6
12PHR-N
TIMER ON
1
Press the TIMER ON ( ) button.
2
The TIMER ON indicator will blink; press the TIME
ADVANCE or REVERSE button to set the desired
time
.
(The time can be set in 10-minute increments.)
3
Press the TIMER SET (SET/C) button.
• The orange TIMER lamp ( ) on the unit will light.
4
Select the operation condition.
1
2
3
NOTE:
• The unit will turn on prior to the set time to allow the room to reach
the desired temperature by the programmed time. (Awaking function)
TIMER OPERATION
COMBINED USE OF ON AND OFF TIMERS
You can use the ON and OFF timers in combination.
Example:
To stop operation at 11:00 p.m. and resume operation to bring the room temperature to the desired level by 7:00 a.m.
1
Set the TIMER OFF to 11:00 p.m. during operation.
2
Set the TIMER ON to 7:00 a.m.
The arrow ( or ) between the TIMER ON indicator and the
TIMER OFF indicator shows which timer will activate rst.
NOTE:
• You cannot programmed the ON-TIMER and OFF-TIMER to
operate the unit at different temperatures or other settings.
• Either timer can be programmed to activate prior the other.
TO CANCEL TIMER MODE
Press the TIMER CANCEL (SET/C) button.
• The orange TIMER lamp ( ) on the unit will turn off.
•
The current clock time will be displayed on the remote control.
NOTE:
• If any TIMER ON, TIMER OFF and ONE-HOUR OFF TIMER
are set, the TIMER CANCEL button cancels all settings.
TO CHANGE TIME SETTING
Cancel the TIMER setting rst, then set it again.
CANCEL
12PHR-N_S530612PHRN.indd 6 2013/8/7 15:42:33