10˚C OPERATION
Heating operation with 10˚C set temperature will be performed.
1
Press the MODE button and select HEAT mode.
2
Press the ON/OFF button to start HEAT operation.
3
Press the 10˚C button.
• The remote control will display “ 10˚C ”.
TO CANCEL
Press the 10˚C button again.
NOTE:
• 10˚C operation will not be available with heating operation automati-
cally selected by AUTO mode.
1
2
3
AUXILIARY MODE
Use this mode when the remote control is not available.
TO TURN ON
Press the AUX button.
• The red OPERATION lamp ( ) on the unit will light and the unit
will start operating in the AUTO mode.
• The fan speed and temperature setting are set to AUTO.
TO TURN OFF
Press the AUX button again.
• The red OPERATION lamp ( ) on the unit will turn off.
AUX
12PHR-N_S530612PHRN.indd 7 2013/8/7 15:42:33
To Next Page
Loading...
