IVT BlueSoleil™ User Manual
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
108
16.3 Control a digital still camera
1
remotely.
This section outlines how to control a digital still camera B via computer A.
Computer A Digital Still Camera B
IVT BlueSoleil™
A Bluetooth Device
Step 1: Insert the Bluetooth Device into computer A.
Step 2: Start BlueSoleil™ on computer A.
Step 3: Power on camera B.
Step 4:
Start remote camera function on camera B.
Step 5: Search for camera B on computer A and connect to its BIP service
.
Step 6: The Bluetooth Camera Controller dialog pops up; the image on the
camera’s LCD is displayed in this dialog. (Figure 16.1)
Figure 16.1 Computer A has connected to Camera B
1
The camera must have remote camera function.
To Next Page
Loading...