To Next Page

To Previous Page

IVT BlueSoleil™ User Manual

All specifications are preliminary and subject to change without notice.

2.6 Start Or Stop A Bluetooth Service Connection

After you have finished the pairing process, it means that you have built the

connection between the client side and remote side. You may start to use the

Bluetooth services the associated Bluetooth device provides.

You can refer to 4.2 Communication Between Two Computers as a more

detailed example.

2.6.1 Search Bluetooth Service

You can double click the associated Bluetooth device icon or right-click on the icon

and select Refresh Services to find the service it provides. After service searching

finishes, the services the remote device supports and the corresponding service

icons on the top of the main window will change to be pink color.

2.6.2 Start A Remote Bluetooth Service Connection

You may right-click on the connected Bluetooth device, select Connect and

highlight the service you want to use (Figure 2.11).

Double click the pink profile icon (the service icon) you want to connect on the top

of the Main Window.

Figure 2.11 Connect to the remote service

Connection will be setup. After connection is OK, the remote device and the service

icon will turn green.

IVT BlueSoleil User Manual

Questions and Answers: