IVT BlueSoleil

IVT BlueSoleil™ User Manual
Copyright © 2001, IVT Corporation, http://www.ivtcorporation.com
All specifications are preliminary and subject to change without notice.
81
10.3 Set up SYNC Connection between Two Computers
This section outlines the steps involved in setting up a SYNC connection between
two computers, Computer A and Computer B. Computer A works as a server that
provides the BlueSoleil™ SYNC service. Computer B works as a client that uses the
SYNC service provided by Computer A.
Computer A: Computer B:
IVT BlueSoleil™ IVT BlueSoleil™
A Bluetooth Device A Bluetooth Device
Step 1: Insert the Bluetooth Devices into each computer.
Step 2: Start BlueSoleil™ in each computer.
Step 3:
Start the BlueSoleil™ SYNC service on Computer A. Before starting
the SYNC Server, it may need to be configured. To configure the
server, follow the steps below:
♦ In the Main Window click View | Service Window
♦ In the Service Window, right-click the Information
Synchronization icon. Select Properties on the pop up menu.
♦ Set the option you require, and then click OK. (Figure 10.1)
Figure 10.1: Service Configuration