To Next Page

To Previous Page

IVT BlueSoleil™ User Manual

All specifications are preliminary and subject to change without notice.

♦ Enable Data Encryption

If the item is checked, the transmitted data will be encrypted into an

unreadable format.

3.2.2 Devices Property Page

Figure 3.2: Devices Property Page

when you establish connection with a paired device, you needn't input a passkey

again. A link key has been created and stored for the paired relationship.

How to pair with another device

♦ Automatically

If a passkey is required before connection, devices will pair automatically the

first time they connect (a passkey must be successfully exchanged).

♦ Manually

In the main window of BlueSoleil, right click a device, select Pair Device from

the popup menu, and then input a same passkey on both side.

How to unpair with another device

Manually

1. Click Remove Pairing button in this page.

2. In the main window of BlueSoleil, right click a paired device, select Unpair from

the popup menu.

Authorization for paired devices

Only when the Security Level is set as Medium in General Property Page, the

Authorization button is enabled. Select a device in Paired Devices list, then click

Authorization button to show an authorization dialog.

IVT BlueSoleil User Manual

Questions and Answers: