What to do if Ivy Biomedical Systems Monitor does not indicate “ARMED?”
If your Ivy Biomedical Systems Monitor doesn't indicate “ARMED” (models 3100, 3150, and 3200 only), ensure that the system interlock is connected via the auxiliary port, the patient ID is entered, and the X-ray function is turned off.
How to fix System Interlock symbol not showing connection on Ivy Biomedical Systems Monitor?
If the System Interlock symbol isn't showing a connection on your Ivy Biomedical Systems Monitor (models 3050, 3100, 3150, and 3200 only), ensure the auxiliary port is properly connected.
What to do if “DISK WRITE FAILED” message appeared on Ivy Biomedical Systems 3000?
If your Ivy Biomedical Systems Monitor displays a “DISK WRITE FAILED” message (models 3100 and 3150 only), verify that a 3.5” floppy disk is inserted into the floppy drive and that the floppy disk is not full.
General| Screen Size | 10.4 inches |
|---|---|
| Resolution | 800 x 600 pixels |
| SpO2 Range | 0-100% |
| NIBP Method | Oscillometric |
| Battery Type | Rechargeable Lithium-ion |
| Weight | 4.5 kg |
| Parameters Monitored | ECG, SpO2, NIBP, Temperature, Respiration |
| ECG Channels | 3 or 5 lead |
| Temperature Type | Rectal, Axillary |
| Respiration Rate Range | 0-120 bpm |
| Respiration Method | Impedance |
| Alarms | Audible and Visual |
| Power Supply | AC 100-240V, 50/60Hz |
| Connectivity | RS-232, Ethernet |
| Operating Temperature | 10-40°C |
| Storage Temperature | -20-60°C |
| Recorder | Optional |
| Networking | Optional |
| Humidity Range | 15-95% (non-condensing) |
To Next Page
