Ivy Biomedical Systems 3000 Series Service Manual

SPECIFICATIONS
Recorder (optional)
Writing Method: Direct Thermal
Number of Traces: 1
Modes: Direct - Manual Recording
Timed - Print button initiates a 30 second recording
Delay - Recorder is activated by an alarm
Paper Speeds: 25 and 50 mm/s
Resolution: Vertical - 200 dots/in.
Horizontal - 600 dots/in. at ≤25 mm/s
400 dots/in. at >25 mm/s
Frequency Response: >100 Hz at 50 mm/s
Data Rate: 400 samples/s/trace
Synchronized Output (Trigger)
Phase Delay from Electrode
Leads to Trigger Output: < 3 ms
R to R Trigger Accuracy: ±50µs typical @ 1 mV input
Pulse width: 1 to 150ms (standard 150ms)
Pulse amplitude: 0 to 5V or ± (0 to 12V)
Output Impedance: <100 Ω
Sensitivity and Threshold
Adjustment: Fully Automatic
Real Time Clock
Resolution: 1 minute
Display: 24 hours
Power Requirement: The real time clock keeps time if the monitor has power or not.
The clock is powered by a dedicated battery whose life is minimum
4 years at a temperature of 25
o
C
Environmental
Operating Temperature
Range: 5°C to 35°C
Storage Temperature
Range: -5°C to 60°C
Relative Humidity: 0-90% non-condensing
Atmospheric Pressure: 500-1060 mbar
Power Requirements
Voltage Input: 100 to 230V~
Line Frequency: 47 to 63 Hz
Fuses Type and Rating: T.5A, 250V (Metric 5x20mm)
Maximum ac Power
Consumption: 35 VA
Regulatory
Unit meets or exceeds the specifications for the AAMI Cardiac Monitor Standard EC-13, UL2601-1,
CAN/CSA C22.2 No 601.1-M90, CDN MDR (CMDCAS), IEC 60601-2-25, IEC 60601-2-27,
MDD.93/42/EEC, CE 0143, ISO 13485:1996, and FDA/CGMP.
Model 3000 Series Service Addendum
27

Ivy Biomedical Systems 3000 Series Specifications

General

Brand	Ivy Biomedical Systems
Model	3000 Series
Category	Monitor
Language	English