21 2
HOLD/DND (Hold/Do Not Disturb) - This key
is used to put a call on Hold or to set the Do Not Disturb
function and prevent any calls from getting through or
ringing at your extension.
Handset Volume Control - The handset
volume control key allows you to adjust the handset
volume to one of three levels. Pressing the button will
toggle between the three volume levels.
Speaker Volume Control - The speaker
volume control key allows you to adjust the volume control
of the speaker when using the speakerphone. Pressing
the [+] key raises the volume to one of nine settings.
Pressing the [-] will decrease the volume.
Ringer Volume Control - Pressing the
ringer volume control button allows you to adjust the
ringer volume to one of four levels.
[Mute] Key - When talking using the handset,
pressing the [Mute] key mutes the handset transmitter.
If using the speakerphone, pressing the [Mute] key
mutes the station microphone. When using the headset
jack, the [Mute] key mutes the transmitter on the headset.
ICM - The intercom system is the internal network used
to communicate between the telephone extensions in
your Iwatsu system. Pressing the [ICM] button connects
you to an intercom line for conversation with other
extensions.
Making an Outgoing Call
•
Lift the receiver
•
Press an outside line button. You will hear a dial tone.
•
Dial telephone number
Make a dialing mistake?
•
Press the [FLASH] button to get new dial tone
•
Dial again
Receiving an Incoming Call
When your phone rings and lamp flashes
•
Lift the receiver to connect the call
If your phone does not connect you to the
call automatically
When your phone rings and lamp flashes
•
Lift the receiver
•
Press the button with the flashing lamp to connect the
call
BASIC FEATURES
NOTES: