Call Storage
Your telephone may be programmed to capture, store
and display telephone numbers and IDs from calls
received with Caller ID, ANI or DNIS information.
To view call information:
For station
•
Press [SPKR]
•
Press the illuminated [USAS] key to display information
about the first call that occurred at your station
•
Press to scroll forward and to scroll backward
in sequence
For trunk group
•
Press [SPKR]
•
Press the illuminated [UST] key, or
•
Press the [USAT] key + trunk group number to display
information about the first call that occurred on a
specific trunk group
•
Press to scroll forward and to scroll backward
in sequence
To delete a call record from system memory
•
With a call record displayed, press the [USD] key
•
Lift the receiver (handset)
•
Press the [FEAT] button and dial +
•
Dial the number of the extension where the call is
parked, or press the extension button (if assigned)
or
•
Lift the receiver (handset)
•
Press [PARK PICK-UP]
•
Dial the number of the extension where the call is
parked, or press the extension button (if assigned)
Save Dialed Number
While speaking on an outside line
•
Press the [FEAT] button and dial +
or
•
Press the [SAVE DIAL] button (if assigned)
You will hear a confirmation tone that indicates the
phone number you just dialed has been saved.
To dial the saved number
•
Lift the receiver
•
Press the [FEAT] button and dial +
or
•
Press the [SAVE DIAL] button (if assigned)
•
The saved number is automatically dialed
Last Number Redial
To automatically redial the last number you called
•
Lift the receiver
•
Press the [SPEED] button and dial
ADVANCED FEATURES
5 18
To register a flash to make another call
•
Dial +
•
Once an outside call has been made, another call may
not be placed
MENU DISPLAY
IP Telephone Menu Display
The IX-12IPKTD-E and IX-12IPKTD IP Telephones are
equipped with a Menu Display, three Menu Buttons, and
Up/Down scroll keys.
•
The Menu Buttons control various features made
available through the display. Many of the Basic and
Advanced Feature codes are accessible through the
Menu Display on the IP Telephones.
•
The Up/Down Scroll keys are used to scroll up and
down through the Menu Display.
To access a Display menu feature:
•
Select the MENU button on the IX-12IPKTD/-E display
•
Use the Up/Down arrow keys on the right side of the
display to view the desired feature
•
Follow the onscreen options to execute the feature
List Menu
The List menu is a library of available Enterprise-CS
feature codes. You can scroll through the available
documented codes using the arrow keys on the LCD.
To scroll using the arrow keys:
•
Select the List button on the IX-12IPKTD/-E display
•
Use the Up/Down arrow keys on the right side of the
display to view the desired feature code
There are two jacks on the back of your IX-12IPKTD-E,
IX-6IPKTD-E, and IX-12IPKTD IP Telephones. One jack is
labeled “PC” and the other is labeled “LAN”. Use the PC
jack to connect to a second device.
To use the layer 2 switch:
•
Connect on Category 5 cable from the PC jack on the
IP telephone to the NIC card on your PC
•
Connect one Category 5 cable from the LAN jack on
the IP telephone to the wall jack connected to the local
area network
For a full list of Display Menu features, please refer to
the IP Telephone User Guide in your Iwatsu
Owner’s Manual.
LAYER 2 SWITCH
To Next Page
Loading...
