Iwatsu ADIX - Managing Call Forwarding Modes; Forwarding All Calls; Forwarding Calls When Busy; Forwarding Calls with No Answer

Changing the Call Forward Mode
All Calls
Automatically forward all calls arriving at your
telephone to another extension.
þ
Lift the receiver
þ
Dial the Call Forward Mode Change code and
dial 1
þ
When you hear the confirmation tone hang
up
Busy
Forward calls only when you are busy on
another call.
þ
Lift the receiver
þ
Dial the Call Forward Mode Change code and
dial 2
þ
When you hear the confirmation tone hang
up
No Answer
If you are unable to answer a call within a
specified time, you can have the call forwarded
to another extension.
þ
Lift the receiver
þ
Dial the Call Forward Mode Change code
and dial 3
þ
When you hear the confirmation tone hang
up
Follow Me
When you move to a different extension, you
can change the forwarding destination from the
extension originally set to the phone that you
are now using.
þ
Lift the receiver
þ
Dial the Follow Me code, then dial your
extension number
þ
When you hear the confirmation tone hang
up
Cancel Call Forward
þ
Lift the receiver
þ
Dial the Cancel code then dial the Call
Forward code
þ
Your phone will return to normal operation
Call Pickup
Internal Group
You may answer calls ringing at any extension in
your pick up group without dialing the
extension number. When you hear a call ringing
at another extension:
þ
Lift the receiver
þ
Dial the Internal Group Call Pick Up code
þ
The incoming call is connected to your
extension
Direct Extension
You may answer an incoming call at another
extension
þ
Lift the receiver
þ
Dial the Direct Extension Call Pick Up code
þ
Dial the number of the extension where the
call is ringing
þ
The incoming call is connected to your
extension
Busy ICM Callback
When you call another extension and get a
busy signal, do not hang up:
þ
Quickly press and release the receiver button
þ
When you hear the dial tone, dial the Busy
ICM Callback code
þ
When you hear the confirmation tone hang
up
þ
When the busy extension is available, you will
receive a call back
þ
Lift the receiver and you are automatically
connected to the extension
To Cancel Busy ICM Callback
þ
Lift the receiver
þ
Dial the Cancel code then dial the Busy
ICM Callback code
þ
When you hear the confirmation tone hang
up
Busy Number Callback
When an outside number you have called is
busy the system can be programmed to
automatically recall the number at a later time.
þ
When you receive a busy signal do not hang
up
þ
Quickly press and release the receiver button
þ
When you hear the dial tone, dial the Busy
Number Callback Code
þ
Enter the time in minutes (1-9) at which you
want to be called back
þ
When you hear the confirmation tone hang
up
þ
At the set time you will receive a callback
from the system